Featured Products
-
CE Certificate High Quality Suctile Iron Body Hydraulic Flow Control Valve/Water Flow Control Valve/Stainless Steel Flow Control Valve
Minimal starting and motion friction, even at low speeds to ensure smooth movement, no crawling phenomenon.
Resistant to wear and tear.
crushing.
High temperature resistant.
Due to the high chemical resistance of the seal ring and the choice of o-rings of different materials, FOD seals can be used in almost all media.
Because of the special sealing structure, it has good oil return property. -
Wholesale OEM High Quality Suctile Iron Body Hydraulic Flow Control Valve/Water Flow Control Valve/Stainless Steel Flow Control Valve
Space saving structure
Simple, small installation groove
Due to the use of metal pressing mode of installation, good stability in the groove
When the bearing re-flows oil, the dust scraping lip can automatically open under lower pressure and discharge the dirty oil.
Very wear resistant -
OEM/ODM Supplier Factory Direct Supply Lifting Dumper Reversing Hydraulic Valve for Dump Truck
The raised lip on top effectively seals the groove
The reinforcement design with pressure relief function
Low wear and long service life
Suitable for heavy load and high frequency conditions -
OEM/ODM Supplier Factory Direct Supply Lifting Dumper Reversing Hydraulic Valve for Dump Truck
The raised lip on top effectively seals the groove
The reinforcement design with pressure relief function
Low wear and long service life
Suitable for heavy load and high frequency conditions -
Reasonable price Monoblock Sectional Type Hydraulic Distribution Valve Electric-Hydraulic Control Manual Operated Proportional Hydraulic Directional Control Valve
The function of FA1 type dustproof ring is to prevent dust, dirt, sand and metal chips from entering, through special design, prevent scratching, protect guide parts, prolong the working life of seals. The diameter of interference ensures that the upper seal is tightly packed into the groove, thus preventing the invasion of impurities and moisture. FA1 type dustproof ring provides a closed chamber for the cylinder, without screws and brackets, without strict tolerances, and without metal plug-ins, preventing corrosion like metal skeleton dustproof ring may occur. Grooves also do not require strict tolerances.
-
Factory wholesale Jkmatic Water Treatment Equipment/ Y Shape Normally Open Solenoid/Hydraulic/Pneumatic/Water Flow Control Diaphragm Valve for Water Softener and Sand Filter
Excellent wear resistance
Impact resistance
Resistance to squeeze out
Small compression deformation
Adapted to the most demanding working conditions
Due to the pressure between the sealing lip introduces the medium and has full lubrication
Improved sealing performance under zero pressure
Excellent protection from outside air
Easy to installIt is mainly used for sealing piston rod and plunger in heavy duty traveling machinery and static pressure.
-
Factory wholesale Jkmatic Water Treatment Equipment/ Y Shape Normally Open Solenoid/Hydraulic/Pneumatic/Water Flow Control Diaphragm Valve for Water Softener and Sand Filter
Excellent wear resistance
Impact resistance
Resistance to squeeze out
Small compression deformation
Adapted to the most demanding working conditions
Due to the pressure between the sealing lip introduces the medium and has full lubrication
Improved sealing performance under zero pressure
Excellent protection from outside air
Easy to installIt is mainly used for sealing piston rod and plunger in heavy duty traveling machinery and static pressure.
-
2019 China New Design A4vg Series A4vg40 Ep2 Electric Servo Hydraulic Proportional Valve Rexroth
Small installation groove, good sealing performance.
The operation is very stable due to the geometry of the sealing lip that holds the lubrication film best, and due to the use of rubber materials that have proved suitable on pneumatic equipment.
Small structure, so static and dynamic friction is very low.
Suitable for dry air and oil-free air, initial lubrication during assembly plays an important role in long working life.
Lip seal structure ensures proper function.
Easy to fit in sealed groove.
It is also suitable for cushioning cylinders. -
Rapid Delivery for Hoist Cylinder Stroke Single Acting Oil Telescopic Hydraulic Hyva Cylinder for Dump Truck
Minimal starting and motion friction, even at low speeds to ensure smooth movement, no crawling phenomenon.
Resistant to wear and tear.
crushing.
High temperature resistant.
Due to the high chemical resistance of the seal ring and the choice of o-rings of different materials, FOD seals can be used in almost all media.
Because of the special sealing structure, it has good oil return property. -
One of Hottest for Parker Series 2h, 2HD 3h 3HD, Vh, HD, 3L & 2A Hydraulic Cylinder and Pneumatic Cylinderseuropean Standard Hydraulic Oil Cylinder
Rod seals FM1 is suitable for sealing ring with axial moving piston rod, cavity groove can be exchanged with O-ring cavity groove.
Resistant to harsh media and extreme temperatures
Good dry friction characteristics
Static and dynamic friction values are low -
Good Wholesale Vendors Roundline Small Piston Hydraulic RAM Oil Hydraulic Cylinder
This seal pack is used for harsh and harsh operating conditions. Currently mainly used
In order to meet the needs of providing maintenance spare parts for old equipment.
V-type sealing group EK type,
The EKV can be used for pistons with pressure on one side, or
A “back to back” installation is used for sealing systems with pressure on both sides of the piston.
• Able to withstand extremely harsh conditions
- Long service life
• Can be optimized to adapt to the use of the corresponding equipment
• Even if the surface quality is poor, it can meet the sealing requirements for a period of time
• Not sensitive to contamination of hydraulic media
• There may be occasional leakage under certain conditions for structural design reasons
Occurrence of leakage or friction. -
Good Wholesale Vendors Roundline Small Piston Hydraulic RAM Oil Hydraulic Cylinder
This seal pack is used for harsh and harsh operating conditions. Currently mainly used
In order to meet the needs of providing maintenance spare parts for old equipment.
V-type sealing group EK type,
The EKV can be used for pistons with pressure on one side, or
A “back to back” installation is used for sealing systems with pressure on both sides of the piston.
• Able to withstand extremely harsh conditions
- Long service life
• Can be optimized to adapt to the use of the corresponding equipment
• Even if the surface quality is poor, it can meet the sealing requirements for a period of time
• Not sensitive to contamination of hydraulic media
• There may be occasional leakage under certain conditions for structural design reasons
Occurrence of leakage or friction.
