Featured
-
High Quality Static Crush Seal - Back-Up Ring is a complement to the pressure seal (O-ring) – Yimai
The experimental results show that the retainer ring has longer service life and higher reliability than the retainer ring of the modified type, and the working pressure range of the O-ring is expanded. DoubleActing Helix Oscillating Reciprocating Rotary SingleActing Static Ø – Range Pressure Range Temp Range Velocity 0～5000 ≤800 bar -55～+260℃ ≤ 0.5 m/s -
Excellent quality Hydraulic Piston Seals - Piston Seals FB7 is the piston seal for heavy-duty travel machinery – Yimai
FB7 series U ring is a single acting piston seal made of polyurethane rubber injection forming. It has a strong dynamic seal lip and a large contact area of the static seal lip to ensure the effective positioning of the U-ring in the groove. The section of the seal ring is suitable for pressures up to 40 MPa, providing an extrusion clearance to match the pressure value. Due to the good elasticity of polyurethane rubber material, u-rings can be easily installed in enclosed grooves. DoubleActi... -
2022 Good Quality Hydraulic Wipers FA5 - Wipers FAS is the standard dust seal with high dust resistance – Yimai
Wipers FAS dust ring is a rubber ring with a metal skeleton, the role is to prevent dust, dirt, sand or metal debris into the hydraulic cylinder. Reduce the risk of scratches cause d by external contaminants embedded in sliding elements. Excellent dust proof effect can be achieved by the special design of the lip of the dust proof ring. Seals that maintain the normal operation of equipment and maintain the sealing performance of components. Wipers FAS dust ring lip made of nitrile rubber or p... -
Pneumatic Seals FEL is designed for small cylinders and valves – Yimai
The dual function pneumatic piston rod seal/dust ring FEL is designed for small cylinders and valves and has the following advantages over other traditional seals. Lubricated gas, after initial lubrication can be used in dry gas or unlubricated gas. Installation: The self-positioning EL pneumatic seal/dust ring can be easily inserted into the groove before the piston is loaded into the cylinder. Pay attention to the sealing and dust ring lip cannot be damaged by sharp edges during inst... -
100% Original Shaft With Rotary Oil Seal - The radial oil seal SC has a rubber elastomer on the outer edge and is a single lip seal – Yimai
TECHNICAL DRAWING Product Features Outer edge of oil seal: rubber wrapping The sealing lip is fitted with a spring The front end face of the sealing lip is machined Sealing lip molding finished Recommended Industrial gearbox Axis (moderate pollution) Electric tools Product Advantages Oil Seals SC outer edge, Rubber elastomer, Seal lip: Spring loaded, without dust proof lip (applicable to single sealing medium, suitable for higher speed), the sealing lip labial ministry before the end of gen... -
Hot New Products Metal Face Seals - Mechanical Face Seals DO is specifically designed for rotating applications in extremely harsh environments – Yimai
Mechanical Face Seals are predominantly used for sealing the bearings in construction machinery or production plants operating under extremely arduous conditions and subject to severe wear. These include: Tracked vehicles, such as excavators and bulldozers Conveyor systems Heavy trucks Axles Tunnel boring machines Agriculture machines Mining machines Mechanical Face Seals are proven for use in gearboxes, mixers, stirrers, wind-driven power stations and other applications with similar condit... -
Chinese wholesale Hydraulic Piston Seal - Piston Seals FCST is a compact design of double acting piston seal – Yimai
DoubleActing Helix Oscillating Reciprocating Rotary SingleActing Static Ø – Range Pressure Range Temp Range Velocity 30～600 ≤500 bar -40～+110℃ ≤ 1.2 m/s The combined seal ring adopts a unique sealing material and geometry, which is a polytetrafluoroethylene combined seal ring exerted by an elastomer. The combined seal ring is assembled in a superposition into a compact structure with good performance and can be installed in a single piston groove. Its geometry provide... -
PriceList for Valve Stem Oil Seals - The radial oil seal SC has a rubber elastomer on the outer edge and is a single lip seal – Yimai
TECHNICAL DRAWING Product Features Outer edge of oil seal: rubber wrapping The sealing lip is fitted with a spring The front end face of the sealing lip is machined Sealing lip molding finished Recommended Industrial gearbox Axis (moderate pollution) Electric tools Product Advantages Oil Seals SC outer edge, Rubber elastomer, Seal lip: Spring loaded, without dust proof lip (applicable to single sealing medium, suitable for higher speed), the sealing lip labial ministry before the end of gen... -
Good Quality Guide Ring - Piston Guide Ring FKB – Yimai
When the temperature is below 120 ℃, allowing the surface pressure can be up to 50 n/m ㎡’ve put the guide sleeve and the piston and the piston to pick some times to allow surface pressure between planes, to allow specific pressure on the surface of guide sleeve, has considered the nonlinear distribution of contact pressure on the surface of the it is made of load, temperature, and manufacturing tolerance factor. DoubleActing Helix Oscillating Reciprocating Rota... -
New Arrival China O Ring Processing - High quality O-ring seals manufacturer – Yimai
TECHNICAL DRAWING The perfect O-Ring for each purpose Our O-Rings are both cost-effective and perform highly in almost every environment. No matter if you need metric or inch, standard or custom-made O-Rings – any size of O-Ring seals is available – including giant O-Rings using our process. Our rubber O-Rings are made of EPDM, FKM, NBR, HNBR, as well as our proprietary FFKM. Special products apart from rubber O-Rings such as O-Rings in PTFE material and metal O-Rings are also available. O-... -
Chinese wholesale Rod Wear Ring - Rod seals U-Ring FB3 is a single-pass lip seal – Yimai
Installation This kind of seal should have an axial gap. In order to avoid damage to the sealing lip, do not pull the seal on the sharp edge when installing. These seals usually fit in closed grooves and require special installation tools where access is restricted. Upon request, the company will provide the design of such tools. Material P5008 is A Parker polyurethane based material with A Shore hardness of about 93. Compared with other polyurethane materials on the market at present, its ma... -
Best quality Rubber O Ring Cord - High quality O-ring seals manufacturer – Yimai
TECHNICAL DRAWING The perfect O-Ring for each purpose Our O-Rings are both cost-effective and perform highly in almost every environment. No matter if you need metric or inch, standard or custom-made O-Rings – any size of O-Ring seals is available – including giant O-Rings using our process. Our rubber O-Rings are made of EPDM, FKM, NBR, HNBR, as well as our proprietary FFKM. Special products apart from rubber O-Rings such as O-Rings in PTFE material and metal O-Rings are also available. O-...
