What determines the length of service life of an oil seal?
First of all, the poor quality of the oil seal itself is the main reason, if simply to save maintenance costs, replace the cheap and quality can not guarantee the oil seal, in this case frequent replacement of the oil seal is inevitable, another point is the machine causes the oil seal life is short.
Small details determine the life of the oil seal.
1. we may have seen, the old driver will be installed before the oil seal carefully handle the combination of surface chamfering at the burr, rather than pick up on the installation, this seemingly insignificant action but will greatly extend the life of the oil seal!
2. if before the oil seal replacement, the cylinder has damage, strains, scratches, etc., then even if the installation of expensive oil seal, the effect is not satisfactory, so in advance to deal with the failure of the fittings itself is very necessary.
3. the existence of contaminants in the hydraulic oil, impurities, external dust, fine particles and other situations, it is easy to cause the fittings oil seal wear, until the scrap replacement.
4. the high temperature of the hydraulic oil does not need too much description, every year because of high oil temperature to accelerate the oil seal aging and must replace the oil seal countless examples, if the root cause of oil seal damage is determined to be high oil temperature, then the owner or hurry up to repair it!
In addition, the daily construction process should also be given some attention, often observe the use of oil seals, if there is a breakage and other abnormalities to deal with as soon as possible in order to avoid the emergence of a major failure.
Post time: Feb-10-2023
