Rod Seals
-
Rod seals ES are axial preload seals
For different liquid and temperature range, but by choosing to know when the material to control.
By changing or adjusting the axial preload (slot or ring head screw) can adapt to special working conditions.
Due to the stability of forming, it is not sensitive to high pressure peak.
Compared with single seal, the pollution of the medium and the slightly damaged sliding surface is not sensitive.
Due to the contact area and there are several sealing lip, it has excellent sealing performance.
Seals can be cut to facilitate installation. Therefore, in the case of maintenance or repair, there is no need to remove the cylinder completely. -
Rod seals U-Ring BA
Special wear resistance.
Insensitivity to vibration loads and pressure peaks.
Very compression resistance
It has an ideal sealing effect under no-load and low temperature conditions.
Adapted to the most demanding working conditions -
Rod seals OD for control cylinders and servo systems
Minimal starting and motion friction, even at low speeds to ensure smooth movement, no crawling phenomenon.
Resistant to wear and tear.
crushing.
High temperature resistant.
Due to the high chemical resistance of the seal ring and the choice of o-rings of different materials, OD seals can be used in almost all media.
Because of the special sealing structure, it has good oil return property. -
Rod seals M1 are single acting reciprocating seals
Rod seals M1 is suitable for sealing ring with axial moving piston rod, cavity groove can be exchanged with O-ring cavity groove.
Resistant to harsh media and extreme temperatures
Good dry friction characteristics
Static and dynamic friction values are low -
Rod seals U-Ring B3
Excellent wear resistance
Impact resistance
Resistance to squeeze out
Small compression deformation
Adapted to the most demanding working conditions
Due to the pressure between the sealing lip introduces the medium and has full lubrication
Improved sealing performance under zero pressure
Excellent protection from outside air
Easy to installIt is mainly used for sealing piston rod and plunger in heavy duty traveling machinery and static pressure.